SLA materials
SLA resins: 3D printing materials for fine detail and smooth surfaces
SLA resins print in layers from 10 microns, to ±0.5% (minimum ±0.1 mm), on a 350 × 250 × 250 mm build platform. Enquire about larger projects: we may be able to accommodate them. Cured resin is more brittle than thermoplastic.

SLA materials
Small parts that need fine detail and a smooth surface.
Build volume: 350 × 250 × 250 mmEnquire about larger projects: we may be able to accommodate them. We also offer technologies beyond the four processes listed. · Tolerance: ±0.5% (min ±0.1 mm) · Resolution: From 10 microns
SLA 3D printing service| Material | Best for | Cost | Compare |
|---|---|---|---|
| Standard resinHigh-detail photopolymer | Small parts with the finest detail and a smooth surfaceProperties and design notes
Suits indoor, ambient use. | £££££Standard | |
| Tough resinABS-like photopolymer | Functional prototypes that resist stress and strainProperties and design notes
Suits indoor use. FDM nylon takes heavier impact. | £££££On request | |
| Flexible resinElastomeric photopolymer | Soft-touch parts, gaskets and sealsProperties and design notes
Soft and elastic. Suits indoor use. | £££££Standard | |
| Transparent resinClear photopolymer | Clear parts, light guides, visual flow modelsProperties and design notes
Suits indoor use. | £££££Standard | |
| Castable resinBurn-out photopolymer | Patterns for investment casting, jewelleryProperties and design notes
Handle gently before casting. | £££££On request | |
| Biocompatible resinSkin and mucosal contact grades | Anatomical models and guides. Grade confirmed per job.Properties and design notes
Grade confirmed per job. | £££££On request | |
| More SLA materials available. We can source most grades not listed here. Request a material | |||
Rules of thumb
- Standard resin for detailFinest detail and the smoothest surface at 10 microns.
- Tough resin for functionABS-like resin suits fit checks and functional prototypes.
- Castable resin for patternsIt burns out cleanly for investment casting and jewellery.
- Indoor useResin parts suit indoor use; FDM ASA covers long outdoor life.
Resin parts suit indoor use; for long outdoor life choose FDM ASA. Biocompatible grades are quoted per part, with suitability confirmed for each job.
Selection by requirement
| If the part needs | Start with |
|---|---|
| Finest detail, smooth surface | Standard resin |
| Functional prototype, ABS-like behaviour | Tough resin |
| Gaskets, seals, soft-touch | Flexible resin |
| Clear parts, light guides | Transparent resin |
| Investment casting, jewellery | Castable resin |
| Skin or mucosal contact | Biocompatible resin, grade confirmed per job |
Frequently asked questions
Which SLA resin should I use for a functional part?
Tough (ABS-like) resin, which is designed for strength and durability.
Can SLA parts be clear?
Yes, in transparent resin, which gives a clarity close to glass or acrylic.
Is SLA good for outdoor use?
FDM ASA is our recommendation for outdoor end-use, with UV stability. We advise per application.
What is castable resin for?
Investment-casting patterns and jewellery, because it holds fine detail and burns out cleanly.
Related reading
Companies that use HenleyPrint3D
Uploads are secure and confidential.
Next step
Check a resin against your drawing
Upload the model and working conditions. An engineer confirms resin and minimum feature size. Uploads are secure and confidential.
Companies that use HenleyPrint3D